Spinner SPYder (Articulated Fidget Spider)
$4.00 Spinner SPYder (Articulated Fidget Spider)
3D
Published 2022-10-03T06:21:53+00:00
The SPINNER SPYDER! This cute yet creepy design has a spinning eye, which acts as a duel purpose fidget spinner! This is completely print in place with no supports! And the best part ----> The eyeball prints UPSIDE DOWN allowing for unique color options with only a single extruder!
There are 3 Model Options!!!! All models ALSO have 2 more variation options! Spider eyes VS no eyes! And Hanging holes!
1. SOLID EYE: This model option is so fun! The weight of the eyeball creates a great fidget spinner toy!
2. HOLLOW EYE: This model has the eyeball as an empty cavity with a separate lid. This allows for you to insert a light inside and have the eyeball glow! Important note: the filament used for the eye must be translucent or white for light to glow through, opaque colors do not work well.
3. RESIN: This model has holes specifically made for resin printing. Please read the below important notes for more resin information about this model.
Important notes on this model:
1. Like most print-in-place spiders, the legs (and eyeball) have little bed surface area. We recommend printing with at least a brim, or a raft.
2. We have a Resin option available, however we have not been able to fully test in resin. The only issue I see is that as the resin expands, the LID might be too big to fit. We recommend scaling just the lid down a bit if that is an issue. We have included a separate lid file to help.
3. I have included a link below for the tiny lights that I use. The hollow model at 60% will not fit these lights. 70-80% should work for these lights. https://www.amazon.com/JJGoo-Waterproof-Birthday-Halloween-Christmas/dp/B07TMY9L3J/ref=sr_1_6?crid=NQPAWFI8AT0J&keywords=tiny+led+lights&qid=1663890203&sprefix=tiny+led+light%2Caps%2C184&sr=8-6
-------------------------------------------------------------------------
Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!
This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.
If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below!
The Digital files are never to be re-sold, shared, or given away!
Please share images of your creations here by clicking on +Add your picture! I would love to see them! :)
Commercial License and monthly bonus models:
Tribes
Patreon
To see all things Cinderwing3D, including all of our models (public and exclusive bonus ones) visit our website:
Cinderwing3D Website
Please see our other public models here:
The Cinderwing3D MMF Store
Check us out on our socials!
Facebook | Twitter | Instagram | Tiktok
FDM settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
All prints are tested down to 60% unless noted otherwise
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexpsore and fused links. The Ameralabs Town testing is highly reocmmended to tune your settings as to get proper articulated prints! Exposure varies greatly bewteen resins, printers, and enviroments.
| Date published | 03/10/2022 |
| Precio | $4.00 |
| ¿Cuándo tiempo lleva? | 8 - 13 minutos |
| Cantidad de filamento | Around 120g |
| Dimensiones | 173.58 x 147.28 x 37.93mm |
| Tecnología | FDM |
| Sin apoyo | YES |
Tricolor Blue/Red/Yellow filament from OVV3D on my Neptune 3