Stackable paint trays, display trays and utility trays
$9.95 Stackable paint trays, display trays and utility trays
3D
Published 2022-12-07T18:48:42+00:00
Stackable paint trays from the successful Kickstarter:
https://www.kickstarter.com/projects/svendfeldt/stackable-paint-trays-stl-files-for-3d-print
These trays offer a modular and compact method to store your dropper bottles. Despite being compact, they offer great color overview.
Included in this is (1008 STL Files ): (For a cheaper option, look here: Stackable paint trays )
- "Display trays" size 1 to 12 (Holding from 1-12 bottles - Check out the Double display trays as well, these holds 2-24 bottles).
- These trays can be stacked efficiently or hung on a wall in many different angles
- Display mounts, to hang the trays
- From vertical to horizontal in different angles
- Utility trays. Trays in all different shapes and sizes, to store magnets, brushes, ood paints
(utility trays only works when the paint trays are horizontal (on wall or desk))
- 624 different utility trays
- sizes 1-12
- height 10 mm - 45 mm @ 5 mm steps,
- compartments 1-12
- 624 different utility trays
Supported paint bottles:
The trays are tested using
- Army Painter
- Vallejo
- Reaper Miniatures Master Paint
- Scale 75
- "Ebay Dropper bottle"
Backers have tested and verified support for
- AK
- Ammo
Support for the below can be bought as well - But NOT part of this
- Citadel
- P3
- Apple Barrel
- Delta CeramCoat
Comment on print tolerances and paint bottle variance.
As these trays are using interference fit, they are susceptible to printer and bottle tolerances. This have been mitigated by adding a printed spring to the interference fit. Added to that, files with difference tolerances have been generated to allow you to find the setting that matches your printer and paints perfectly.
A document outlining the process have been created to aid the selection
Please be aware that this document was generated to the backers of the Kickstarter, therefor not all sections apply to this delivery
Stackable paint trays documentation
********************
If you consider buying or have bought objects in the stackable paint trays serries, please conside rthe collection and gain a huge saving
https://www.myminifactory.com/object/3d-print-336236
Printing using 0.28 mm layer height and 10% infill
Print time and size depends on size chosen.
| Date published | 07/12/2022 |
| Precio | $9.95 |
| Sin apoyo | YES |
Just a small picture from my current paint session. It shows how easy it is to pack up Paints and brushes after a paint session. - Ready for next session, with all needed paints