Steampunk Style Lampshade
$6.50 Steampunk Style Lampshade
3D
Published 2021-04-09T16:20:06+00:00
Fully functional lampshade in Steampunk style.
Overview:
- 7 individual parts for 3D print
- Assembled lampshade consist 14 pieces of 3D printed parts, 40pcs - M6x20 screws and 8pcs - M6x30 screws
- All 3D printed parts weighs ~0.6kg (PLA filament)
- All parts can be printed on 200mm x 200mm x 200mm 3D printer or bigger
- All the parts no need support when 3D print
Design updates:
EDIT 2021.06.17: Part number 210329 - 04 is now in revision 2. There was an issue with fixing bulb holder. Now should works fine.
My social media:
If you have questions regarding assembling, suggestions to the project or want to see on what I'm currently working on, please join to Discord channel:
https://discord.gg/QKYsgs6BZG
https://instagram.com/tomaszfortyfour
https://facebook.com/TomaszFortyFour
https://youtube.com/channel/UCNhx2r8dA9hvST4pntiSzfQ
Painting guides:
Iron rust (Modern Masters paint):
https://youtu.be/1xOuB0sGLH0
Bronze patina (Modern Masters paint):
https://youtube.com/watch?v=98WkF9aaf6c
Iron rust (Ecorson Oxidecor Fine and Jeger activator):
https://www.youtube.com/watch?v=NA6MUdbfwLg
Assembling guides:
PDF: LINK
Youtube: https://www.youtube.com/watch?v=XPvLhvGmitM
Bill of materials:
210329 - 01: 2 pcs
210329 - 02: 1 pcs
210329 - 03: 1 pcs
210329 - 04v2: 1 pcs
210329 - 05: 1 pcs
210329 - 06: 6 pcs
210329 - 07: 2 pcs
M6x20 screws – 40 pcs, M6x30 screws – 8 pcs (for assembling item no.: 210329 - 07) - https://s.click.aliexpress.com/e/_A8p4pJ
E27, 30cm long Edison bulb (I suggest LED 6W one, it heats up less than standart one) - https://s.click.aliexpress.com/e/_9vNWLS
Aliexpress (it is one shop where you can buy all this items):
E27 Holder for bulb, black - https://s.click.aliexpress.com/e/_9IV8MN
Around 2m retro cable - https://s.click.aliexpress.com/e/_Ab15zF
B style Cable clamp - https://s.click.aliexpress.com/e/_AtuSA1
For personal (non-commercial) use only. This model or parts of it CANNOT be sold, shared or distributed in digital, physical, original or modified form.
- if you want to paint you can print with 0.3mm layer height
- use 3 wall lines
- 5 bottom and top layers
- 20% infill
- nozzle - 0.4mm or 0.6mm (on all my prints I use 0.6mm)
| Date published | 09/04/2021 |
| Precio | $6.50 |
| Sin apoyo | YES |