Storage box (traders & barbarians)
Storage box (traders & barbarians)
3D
Published 2017-06-20T19:43:25+00:00
This is my fully printable storage-box-solution fort the expansion "traders & barbarians" (http://www.thingiverse.com/thing:853663).
These are the parts you need to print for the box:
2 x storage part 1 (If you used self-adhesive-foil to cover the buttom of your tiles or anything that makes them thicker than the original files, print 2 x storage part 1 big)
1 x storage top
1 x storage part 2
1 x storage part 3 (If you used self-adhesive-foil to cover the buttom of your tiles or anything that makes them thicker than the original files, print storage part 3 big)
2 x swamp
1 x castle
1 x quarry
1 x glassworks
2 x river ore
2 x river brick
1 x river wool
1 x oasis
1 x lake
The biggest sices you need to print are 19.5 cm x 20.00 cm (7.67 x 7,87 inches). So make shure you're printerbed is big enough. For transporting the box, make sure that you grab it on the bottom, not the top...
Have fun :-)
Printer brand : Ultimaker
Printer : Ultimaker 2
Rafts : No
Supports : No
Resolution : 0.8 mm
Infill : 18%
| Date published | 20/06/2017 |
| Tecnología | FDM |
| Complejidad | Medio |
| Sin apoyo | YES |