Super Mario Odyssey Spark Pylon
2,057
visitas
64
descargas
0 comentarios
Cargando comentarios... 
Super Mario Odyssey Spark Pylon
3D
Published 2021-05-10T10:23:41+00:00
7
0
Add to Collection
Descripción
The Spark Pylon is one of 52 captures in Super Mario Odyssey. I made this design of it in Fusion 360.
The walls are 5 mm thick, if you'd like to put a light in the top the hole into the sphere should be large enough for that.
Enjoy!
Licencia
Detalles de impresión
The object can be printed without supports, but it does have 90 degree overhangs so you'll need good bridging, and I wouldn't reccomend it.
I used a makerGear M3 with clear PLA and .2 layer height. I used 0% infill, 3 outer shell layers, 2 bottom layers, and 3 top layers.
Additionally the print was done with a raft.
Información técnica
| Date published | 10/05/2021 |
| Dimensiones | 65.4 x 65.4 x 103 |
Más información
Archivos
