Tall Twisted Vase (Vase Mode)
Tall Twisted Vase (Vase Mode)
3D
Published 2023-01-31T10:57:27+00:00
Adding a beautiful vase to your home is a great way to bring color to your living space.
This tall twisted vase is great for displaying dried flowers and bringing elegance to any room. You can also use it decoratively without flowers. And what could be more fun than printing your piece, right?
It is easy to print in vase mode. Select the ‘spiral vase’ setting in PrusaSlicer or ‘spiralize outer contours’ in Cura, and you are ready to go.
I recommend printing with at least a 0.6 mm layer (extrusion) width to make it sturdy, preferably thicker.
Size: 5.4 x 20 cm (scale to your liking)
Print time: 1 - 3 hours
Happy printing
Non-commercial use only
TIP: Add some sand or pebbles to the bottom to prevent it from tipping over.
---
3D Printing settings
Nozzle size: 0.4 (preferably larger)
Layer height: 0.2 - 0.3 mm
Layer (extrusion) width: at least 0.6 mm
Print speed: 35 - 45 mm/s
Vase mode enabled
5 - 7 bottom layers
Nozzle size: 0.4 (preferably larger)
Layer height: 0.2 - 0.3 mm
Layer (extrusion) width: at least 0.6 mm
Print speed: 35 - 45 mm/s
Vase mode enabled
5 - 7 bottom layers
| Date published | 31/01/2023 |
| ¿Cuándo tiempo lleva? | 60 - minutos |
| Dimensiones | 5.4 x 20 cm |
| Sin apoyo | YES |