Tesla's "Valvular Conduit"
5,504
visitas
271
descargas
1
colección
3 comentarios
Cargando comentarios...
Tesla's "Valvular Conduit"
3D
Published 2015-04-22T23:58:01+00:00
4
3
Add to Collection
Descripción
This is #1,329,559 US, “Valvular Conduit,” issued 1920, with a twist. Specifically, a 90 Degree twist.
Ultimately the resistance goes in only one direction, but this is NOT a valve replacement. This is a proof-of-concept that adding additional axes increases the flow resistance (and, as it turns out it does!). This sort of conduit works best with fluids that have an impulse, and the greater the impulse the greater the resistance to backflow. Watch for more physics gimmicks coming in the next few days.
Detalles de impresión
Print at 0.2 mm layer height, with 10% infill. This uses 34 g of filament and takes 7 hours and 2 minutes.
Información técnica
Date published | 22/04/2015 |
¿Cuándo tiempo lleva? | 422 - 432 minutos |
Cantidad de filamento | 34 g |
Dimensiones | 36 mm x 109 mm x 36 mm |
Complejidad | Muy fácil |
Más información
Archivos