Thrust Reverser with Turbofan Engine Nacelle, Modification Kit
Thrust Reverser with Turbofan Engine Nacelle, Modification Kit
3D
Published 2021-12-08T14:28:01+00:00
This is the Modification kit for Thrust Reverser with Turbofan Engine Nacelle previously uploaded.
https://www.myminifactory.com/object/3d-print-thrust-reverser-with-turbofan-engine-nacelle-75540
A. Improved points;
①. Engine to Reverser V-groove alignment
Hinge and Beam (More tolerance)
②. Fan Cowl hinge method changed to get larger open angle
Hinge and Beam (Easier for assembly)
③. Fan Cowl holding features added
④. Assembly Manual added
B. Assembly Manual (PDF format, total 7 pages)
The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)".
Figure and photo in this manual are shown about parts related improve points only.
If you already assembled, you can modified without full disassembly.
C. Download files includes;
- files: STL Files (11 items)
- “ws” of last 2 digits means “With Support” special designed.
D. Purchase Parts Information;
- Screws (Size and Qty) are shown in each Step.
M2x** (See text)
Micro screws M1.4x3.5L and 6L
Piano Wire φ1x70L
E. Total Net Print Time: Approx. 14 HR (except option item)
(Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.
See above
| Date published | 08/12/2021 |