Tim’s reinforced Slingshot V2 (original files)
Tim’s reinforced Slingshot V2 (original files)
3D
Published 2019-12-19T08:40:12+00:00
This is an updated slingshot & is released for transparency & as a regular release
This slingshot versatile for various for things as projectiles to hit targets
You can also use the old pellets from the pellet slinger or you can also use environmentally friendly ammunition like beans , grapes , for a paintball effect shoot out berries
(just update unless you use erasers this can break thin glass-like windows)
also note this is probably the easiest to train with pellet launcher , it also has more shooting accuracy and more pure punch towards what you shoot
WARNING SLINGSHOT IS ONLY SAFE IF HANDLED PROPERLY ,SAFELY & RESPONSIBLY AND AT YOUR OWN RISK & EVERY SHOOTER ARE RESPONSIBLE FOR WHAT YOU SHOOT AND DO NOT BE RECKLESS OR MISUSE AS RECKLESS OR MISUSE CAN BE DANGEROUS , DO NOT LAUNCH WHEN UNDER THE INFLUENCE
AND CHECK YOUR LOCAL LAWS ALSO BE A GOOD CITZEN AND RESPECT PROPERTY AND NEVER BE CRUEL AND WEAR EYE PROTECTION BEWARE OF RICOCHETS, ADDITIONALLY KNOW YOUR SURROUNDINGS & INTEGRITY OF THIS DESIGN IS ALSO CRITICAL, BY DOWNLOADING OR POSSESSING THESE DESIGNS OR THE 3DPRINTS MEANS ITS ASSUMED YOU UNDERSTAND AND READED THESE AND AGREED BY THESE RULES AND IGNORANCE IS NO ACCEPTABLE EXCUSE
***INSTRUCTIONS (updated)
( for using x2 size 117B rubber bands)
1st get two rubber bands (one on each end you need to single loop knot in the hole and do the same for the other end) that way its secure
2nd step is to make the pouch so while keeping the rubber bands secure layout a small piece of duct tape & sandwich each rubber band on each end of the length with the middle being pre-laminated (this is the easiest way so far)
3rd now you are finished making the slingshot
Slingshot code
treat stretching the elastic as if you're pulling the trigger
keep those innocent out of the equation
any time there is a reasonable risk of accident do not shoot
keep trajectory in mind
control where you point or aim
be actively aware of over-distract & be responsible for your
you should not be drinking or using drugs while shooting.
have full accountability & responsibility of every shot
over-distraction keep the hands and fingers at least 1 inch down from the handles at all times and have a firm grip this firm grip should last as long as the bands are stretched both of these to prevent injury
inspect the bands before use to prevent self-inflicted over responsible distraction-distract responsibility for your accidents
*Warning if you do not have a appropriate target & a appropriate range that's when freak accidents happen
*this will be a lot easier with good brand duct tape
* it might sometimes be easier to 3dprint this on a glass plate then a metal plate, if not an adhesive or a build surface product like buildtak might make things easier
* also this design is pretty strong and durable & tough pla should be plenty , i find warps in general for metal plates unless you use something like build tak or print the first layer or two slow & then put it at 130% speed but a glass plate is will be fine without these adjustments of speed
Also these rubber bands wear out over times so a knife or pair of pliers is the only way to replace the bands & then retie both bands , make the pouch & fire a shot to form the pouch i use x2 size 117B rubber bands but size 107 rubber bands should work
| Date published | 19/12/2019 |
| Dimensiones | 145.5263mm x 145.5699 mm x 11.988 mm |
| Sin apoyo | YES |