Toilet paper storage “snail”
780
visitas
1
colección
0 comentarios
Cargando comentarios...
$4.00 Toilet paper storage “snail”
3D
Published 2023-02-20T14:26:27+00:00
5
0
Add to Collection
Descripción
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A modular toilet paper snail for your bathroom wall. You can add as many modules as you want to store your toilet paper rolls in a comfortable and aesthetic way.
Instructions
- Print the head, tail, and holder
- Print as many modules and hooks as you want (4-8 recommended)
- Connect the modules with the hooks
- You can either screw or glue the holder onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape. Diameter of the two screw holes: 5,5mm
- Insert the snail onto the holder
- Don’t forget to add the toilet paper rolls from top to bottom and remove them from bottom to top – to preserve the balance in the construction!
Detalles de impresión
- Required build volume: 160 x 160 x 160 mm
- Material usage overall with 4 modules: 200g
- Print time with 4 modules: 17h
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 15%
- Build plate adhesion type: none
Información técnica
| Date published | 20/02/2023 |
| Precio | $4.00 |
| Sin apoyo | YES |
Más información
Archivos