Toothbrush holder
717
visitas
1
colección
0 comentarios
Cargando comentarios...
$3.00 Toothbrush holder
3D
Published 2023-02-14T14:28:37+00:00
6
0
Add to Collection
Descripción
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A beautiful toothbrush holder with a unscrewable bottom for easy cleaning.
I always had trouble keeping my toothbrush holder clean. Even putting it in the dishwasher did not result in a clean, hygienic cup. That's why I designed a holder that allows you to simply unscrew the bottom and clean it more easily. This way you get a more hygienic result with less effort.
Size: 76 x 76 x 103 mm
This is the V3
Detalles de impresión
- Required build volume: 100x100x100 mm
- Material usage: 90g
- Print time: 3h base, 6h body
- Material: PLA
- Print direction: stls are rotated correctly, check images (yes the body is printed upside down due to the threads)
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 15%
- Build plate adhesion type: none (if you have bad bed adhesion consider using a brim for the body since it is printed upside down)
- Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Información técnica
| Date published | 14/02/2023 |
| Precio | $3.00 |
| Sin apoyo | YES |
Más información
Archivos