Trellis
Trellis
3D
Published 2018-07-10T17:17:39+00:00
Check out our website
This trellis is designed to be placed in a pot or small area of soil so that a climbing plant can grow up it. In order for it to be of use, you will need a climbing plant and soil to grow it in. Spikes at the bottom of the trellis allow it to remain upright when driven into firm soil. A decorative flower design adds a botanical surprise to the grid layout. #Tinkerfun
This object was made in Tinkercad. https://www.tinkercad.com/things/ltLiDsNqvhd
Object should be print horizontally, with the grid pattern parallel to the build plate. Depending on the printer, supports may be needed for the spikes at the bottom of the trellis as they may be at too shallow an angle to be printed independently. The Trellis file is the object as it will appear for use, trellis-printable comes with supports which have to be cut off once the design is printed. Once printed however, it can stand on its own when driven into soil.
| Date published | 10/07/2018 |
| Dimensiones | 838.2x304.8x25.4 mm |
| Tecnología | FDM |
| Complejidad | Fácil |