Trevor Belmont's Halidie / Boomerang (Stationary Version) - Netflix Castlevania Season 4
Trevor Belmont's Halidie / Boomerang (Stationary Version) - Netflix Castlevania Season 4
3D
Published 2021-08-11T08:17:26+00:00
The Haladie / Boomerang from Netflix's Castlevania. Trevor Belmont uses this to stab and dispose of night creatures at melee range. This is my stationary version. Both the 2 and 4 bladed versions seen in the show can be assembled depending on the amount of pieces that are printed.
blade1-full x 4
blade2-full - optional (x4 for full boomerang version)
handle x 2
rail x 2 ( x4 for full boomerang version)
pin x 4 (alternatively you can buy 6mm x 50 mm wooden pegs off amazon instead of printing the pins)
1. Glue the blade halves, rail halves, and handle halves together with adhesive of choice (superglue, 2 part epoxy etc.)
2. Using the provided pins (or purchased wooden alignment pegs 6mm x 50 mm off amazon) align the blades with the handle and glue together.
3. Wedge the rail against the flat surfacenear the hilt of the blade.
4. If making the full 4 bladed prop, do the same for two sides and glue the assembled blade2-full to the notches that are 90 degrees to the blade1-full arrangement.
I do not recommend throwing this model through the air and cannot guarantee it's resiliency on landing.
| Date published | 11/08/2021 |
| Sin apoyo | YES |