truck assembly model kit
truck assembly model kit
3D
Published 2020-06-12T10:20:18+00:00
A pakistani truck model kid that can be printed on small printers,fun to assemble for kids,each part is 0.6mm thick which has been found to be sufficient but may be uniformally scaled ,can be used for laser cut template making. All parts assemble/join using notches no glue needed.consists of 11 distinct parts,three are printed multiple times,name includes quantity.
All parts are fixed using the notches
1.Take the two sides and attach the 'Basemain' and 'back' part
2. Attach the 'bonnet' and then 'wind shield'
3.Fix the two 'side burns'
4.Fix the 'front bumper'
5.Fix the 'top' followed by 'front_tp'
6.finally fix the three 'topbars' and the two 'truckside crossbars'(glue the crossbars to side if needed)
keep paper cutter handy incase the notches need to be cleared,can be printed in one go if you have a large bed otherwise can be printed in three sets.sides,crossbars and sideburns make one set to be printed twice and all rest can be made into one or two sets
| Date published | 12/06/2020 |
| ¿Cuándo tiempo lleva? | 60 - minutos |
| Sin apoyo | YES |