Truck Rallye Dakar
$1.90 Truck Rallye Dakar
3D
Published 2024-01-12T12:02:11+00:00
This Rally Dakar Truck 2024 is a model designed mainly for print-in-place. Mainly because It consists of two parts (chassis and cabin) which is easy to put on . No glue needed. Wheels are designed to spin.
If you want to legally sell the printed models, you can get my permission through this link: https://www.patreon.com/Swah3d
This is print in place, no supports required.
Easy printing
0.4mm nozzle
0.2mm layer height
15% infill
3 walls
PLA works best
Scalability
You can enlarge the model as you like, but if you want to reduce it, I recommend a maximum of 10%. If it gets too low, the wheels won't spin.
Print Orientation
As the STL file is oriented
This model is printed no supports, just make sure you have good adhesion to the bed.
Print, enjoy and have fun!
This is print in place, no supports required.
Easy printing
0.4mm nozzle
0.2mm layer height
15% infill
3 walls
PLA works best
Scalability
You can enlarge the model as you like, but if you want to reduce it, I recommend a maximum of 10%. If it gets too low, the wheels won't spin.
Print Orientation
As the STL file is oriented
This model is printed no supports, just make sure you have good adhesion to the bed.
Print, enjoy and have fun!
| Date published | 12/01/2024 |
| Precio | $1.90 |
| Sin apoyo | YES |