Ubiquiti - UniFi AC Lite AP - Mount
Ubiquiti - UniFi AC Lite AP - Mount
3D
Published 2019-07-04T07:55:11+00:00
This is a rough reverse engineer of the included wall mount for my Ubiquiti UniFi AP AP Lite. I wanted to mount it to a metal square tube section on my custom desk and did not want to mangle the included mounting plate. So I made my own!
Sorry the bracket side is for a non-standard custom desk however there should be enough geometry available in the STLs to remix the files for your needs. If there is enough interest in the design I can consider making adapter mounts for other surfaces/objects.
You are welcome to remix the design as you like.
Please do not upload my design or remixes to anywhere but MyMiniFactory.
Due to how hot the access point gets under load, it is NOT recommended to print this in PLA.
Print in ABS or PETG with 4 or more shells and 20% or higher infill for best results. Mine was printed in ABS.
| Date published | 04/07/2019 |
| Sin apoyo | YES |