Universal Delta 2020 Spool holder / Filament support, supportless and screwless
Universal Delta 2020 Spool holder / Filament support, supportless and screwless
3D
Published 2017-08-11T11:05:24+00:00
Hi !
This is my new UNIVERSAL 2020 spool holder / filament spool support,
It can be printed without any support
It can also be used without any screws!
Even the universal ROD can be printed too :p
Can be used on ALL 2020 delta/kossel printers of any size
There is a small slot under the foot to let any cable pass under
INSTRUCTIONS :
-Print 1x SupportLEFT, 1x SupportRIGHT, 2x FootBOTTOM, 2x FootTOP, 8x Pin
-Assemble all parts
-Put them on your printer
-Measure the size of the ROD you will need
-For exemple if you need a 200mm rod, import the ROD stl in your slicer, and set the print height stop to 200mm and print the rod
(the rod is not a simple round object because it's stronger like this)
And VOILA, you have a 100% printed spool holder :p
Please, if you download this object put a Like on this thing :p (or if you have too much money think to tip :p
If you have any ideas or suggestions, contact me here :p
Think to stop the print of the rod at the size you need because the rod make 400mm dy default
| Date published | 11/08/2017 |
| Sin apoyo | YES |