USB Holder_Arc-Reactor-LED
1,614
visitas
101
descargas
1
colección
0 comentarios
Cargando comentarios... 
USB Holder_Arc-Reactor-LED
3D
Published 2020-09-09T05:45:42+00:00
25
0
Add to Collection
Descripción
Modify the original version to add a LED strip or LED ring, of any kind RGB, or any color. In this case it is a RGB Strip with the IR remote. Can glue the USB Holder and the base, or just ensemble together.
Inside can place a 12mm wide LED strip, and the hole is 9mm wide by 8mm high.
Licencia
Detalles de impresión
Printed at 60mm/s Print Speed, consider slower speed for small parts. Consider just a feew lines of wall, I use 0.8, so that gives you between inner and out wall a total of 1.6mm. Four layers for Top and Buttom. Infill at 30% with ZigZag Pattern. General
-Cura Slicer
-0.4 Hardend Nozzle
-Bed Tempt 60°
-CMagnet Plate
-For the Base (Print one)
-No support Zig Zag, 45°
-Nozzle temp 205°, PLA GizmoDorks Silver For the LED/ USB Support (Print one)
-Print Face Up
-Support 10%, 45° infill line direction
-Nozzle temp 220°, PLA GizmoDorks Translucent For the USB-Caps (Print ten)
-Print Upside down
-No Support
-Nozzle temp 220°, PLA CC3D Silk Cooper Inside Base (Print one)
-Print Face up
-Support 10%, 45° infill line direction
-Nozzle temp 220°, PLA CC3D Silk Silver
Información técnica
| Date published | 09/09/2020 |
| Dimensiones | 110x110x60 |
Más información
Archivos