Walksnail Goggles X LED Cover with HDZero and Steadyview X
Walksnail Goggles X LED Cover with HDZero and Steadyview X
3D
Published 2023-12-19T10:18:20+00:00
This is a modification of the LED cover released by Walksnail/Caddx for the Walksnail Goggles X. It allows for mounting off either just and HDZero/Sharkybyte VRX or a HDZero VRX and a Skyzone Steadyview X VRX. The VRXs are mounted upside down to optimize placement and to minimize torque out front of the goggles. I hope to be able to make a faceplate to improve the face feel of these goggles for narrower faces. In the meantime I would suggest a good goggle foam and mounting of a battery on the left side of the head to help balance the weight of the analog VRX. I would also suggest purchasing a wider headband to improve the feel of the goggles. I found a mini HDMI to mini HDMI cable with a coiled cord allowed the HDZero VRX to connect to the goggles. I did trim one edge of the connector on the cable to improve the fit of the plugin to the HDMI input of the goggles.
Print with supports with the inside of the LED cover facing the print bed. It printed well for me with a layer height of 0.16 mm
| Date published | 19/12/2023 |