Wall coat hook “caliendrum coral”
821
visitas
5
colecciones
0 comentarios
Cargando comentarios...
$4.00 Wall coat hook “caliendrum coral”
3D
Published 2023-03-17T10:12:48+00:00
12
0
Add to Collection
Descripción
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
Three different coral inspired wall hooks.
Often you don’t have enough hooks for your clothes and accessories – with these designs you can always add more extra pieces to one hook.
All three designs are provided in two versions. One with the cut-out holder for fixation with screws and one with a flat back for fixation with wall mount glue.
Instructions (screw version)
- Print the hook and the according holder. The holder has a clearance of 0.2 mm to slide in with a little friction. If your printer has issues with bridging, and the holder does not fit – you can scale the holder down a bit.
- Mount the holder onto the wall with screws and dowels. The Diameter of the screw holes is 5.5 mm. The distance of the screw holes is 16 mm.
- Slide in the holder from the side.
Instructions (glue version)
- Print the complete corals and glue them to your wall with specialized wall mount glue.
Size approximately: 80x80x60 mm
You can mirror the corals in your slicer to have 6 different versions.
Detalles de impresión
- Material usage per coral: ca 40g
- Print time per coral: 3-4 h
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 5 (2mm thickness)
- Top/Bottom Layers: 6 (1,2mm thickness)
- Infill: 30%
- Build plate adhesion type: none
Información técnica
| Date published | 17/03/2023 |
| Precio | $4.00 |
| Sin apoyo | YES |
Más información
Archivos