Wall-mountable cutlery drainer
Wall-mountable cutlery drainer
3D
Published 2020-02-10T18:23:05+00:00
This is my wall-mounted cutlery drainer. You can put it on and off the wall in one motion. The mounting plate is fixed to the wall with a single M4 screw. The hanger for wall mounting hooks and clips into the square holes of the drainer box from the inside.
I added an optional side-basket for small items that would easily fall to the bottom in the main basket. It hooks to any free side wall of the larger box. Perforated bottoms (for water drainage) through exposed infill (see printing instructions), removable for easy cleaning on the large basket.
I ticked "support free", which is true for all parts except the optional side basked. This one will need some to support the hook.
For perforated bottoms, I printed the drainer bottom with no top and bottom layers and 25 % grid infill. Same goes for the side basket, but there, I would restrict this setting to the bottom 3 mm (using a modifier in the slicer).
| Date published | 10/02/2020 |
| Cantidad de filamento | about 240 g (PETG) for all parts |
| Dimensiones | 106 x 106 x 112 mm (main box without hanger), 77 x 44.4 x 88 mm for side basket |
| Sin apoyo | YES |