Wheel for generic drying rack
3,013
visitas
165
descargas
1
colección
0 comentarios
Cargando comentarios... 
Wheel for generic drying rack
3D
Published 2018-01-09T19:43:17+00:00
24
0
Add to Collection
Descripción
The original wheel for the drying rack got burned during reparations. So I made a new one.
To print this you need:
1 x pin
1 x rod
1 x shell
2 x wheel
Assembly
Update:
The hole inside the shell (v2) and pin (v2) are made bigger so a thicker scew (4mm x 25mm) can be added for added strength.
After printing all parts:
You need to put the rod through the hole of the shell and glue the wheels to each side of the rod with some super glue.
And a screw (2.5mm x 20mm) needs to be added at the bottom of the shell that goes into the pin to get a rotation motion of the wheel.
Información técnica
| Date published | 09/01/2018 |
| Tecnología | FDM |
| Complejidad | Fácil |
Más información
Archivos