Wood Shelf
$1.20 Wood Shelf
3D
Published 2020-10-20T14:11:46+00:00
I needed a shelf so I designed one. This shelf supports are made of wood and PET-G joints, the bars and the joints are connected with 6mm steel pins. To build one, you will need some extra components:
2x 27mm 260mm wood rods
3x 27mm 150mm wood rods
1x 27mm 170mm wood rod
12x 6mm steel pins https://amzn.to/31mwgnG
https://s.click.aliexpress.com/e/_A7tgTd
2x 8/51 rawplugs https://amzn.to/3kiTmmC
https://s.click.aliexpress.com/e/_Ao2OFH
3x 10mm screws https://amzn.to/3dKy5zq
https://s.click.aliexpress.com/e/_AFMfzd
the design includes a hole guide for the rods (to insert the pins)
to buil the guide, you will need a piece of 8mm OD 6mm ID steel pipe https://amzn.to/35jf2IG
https://s.click.aliexpress.com/e/_AMhNeB
you can also use the guide to sanding the rods with a drill and some sand paper
50% infill
0.2mm
Pet_g
| Date published | 20/10/2020 |
| Precio | $1.20 |