Young Obito and Zetsu - Naruto
Young Obito and Zetsu - Naruto
3D
Published 2021-04-01T11:30:45+00:00
I would recommend adding linear supports to this. It worked well for me.
To see how I made it and the final outcome in reality, I put together this video: https://www.youtube.com/watch?v=fTuS_kNboV0
Here is my fan art model of Obito from Naruto during his "freak out" scene as seen here: https://www.youtube.com/watch?v=mwFelqGdQG4
Printer brand:
FlashForge
Printer:
Finder
Rafts:
Yes
Supports:
Yes
Resolution:
0.16
Infill:
15%
Filament brand:
FlashForge
Filament color:
White
Filament material:
PLA
Notes:
As mentioned above, use linear supports. The foot may need extra, as your printer will travel quite a way before meeting up with the body. Be generous with the amount of support on the kicking foot and leg.
I would also recommend using matte PLA (not silk). I always find that silk PLA is more brittle between layers, and hence would not have worked with such a thin design.
Post-Printing
Recommendations for removing supports.
You have to be quite gentle with support removal on the branches. I would recommend using sharp scissor-like tools to snip away supports on branches, rather than pulling as this will likely snap the branches.
The rest of the supports come away pretty easily.
Hope yours comes out as well as mine did :)
| Date published | 01/04/2021 |
| ¿Cuándo tiempo lleva? | 840 - minutos |
| Cantidad de filamento | 150 grams (ish) |
| Dimensiones | 100mm x 100mm x 12.5mm (ish) |
