zohd dart 250 cam/vtx mount fpv plane
$1.00 zohd dart 250 cam/vtx mount fpv plane
Published 2022-10-18T08:36:49+00:00
These were designed for the unmodified zohd dart 250 on 2s or 3s and achieve perfect cg. The rx/battery mount has a slot for a battery strap and the rx belongs in the front angled slot. There are cutouts for wire routing. The idea is that if the battery is strapped in and a crash occurs the tpu takes the impact and doesnt allow the battery to eject destorying the front of you aircraft. I am using a flysky IA6B rx. The cam/vtx mount is designed to slide the main stack from the bottom and then the slit along the back is for pressing the antenna wire through. The antenna wire should be long enough for the antenna to sit atop the pedistle. This protects the floppy antenna from being ripped off in an impact. The mount fits snug but I suggest using hot glue. There are three holes allowing air to rush into the stack allowing cooling and secure mounting. Set vtx power and channel before installation because the button will be covered.
I have fiberglassed this wing and now I use a 4s battery with the camera mount but minus the rx/batt mount and I still achieve good cg.
If the stl appears tiny in your slicer uniformly scale it by 25.4
The file is programmed in inches.
Date published | 18/10/2022 |
Precio | $1.00 |
Sin apoyo | YES |