TrudiePrinsloo's Print of ELVIS
1,871
visitas
1 comentarios
Cargando comentarios... 
Community Print Impresión 3D de ELVIS
Published 2018-12-29T06:56:10+00:00
6
1
Impreso con: Wanhao Duplicator 9
Material: PLA
Descripción
Layer Height - 0.2mm
Initial Layer Height - 0.3mm
Wall Line Width - 0.4mm
Top/Bottom Line Width - 0.4mm
Shell:
Wall Thickness - 0.8mm
Top/Bottom Thickness - 0.8mm
Infill:
Infill Density - 20%
Infill Pattern - Grid
Infill Overlap Percentage - 1%
Material:
Printing Temperature - 210 (ABS - 235)
Build Blade Temperature (ABS - 80)
Diameter - 1.75mm
Flow - 100%
Enable Retraction
Retraction Distance - 5mm
Retraction Speed - 60mm/s
Speed:
Print Speed - 50mm/s
Travel Speed - 100mm/s
Cooling:
Enable Print Cooling
Support:
Generate Support - Yes
Support Placement - Everywhere
Support Overhang Angle - 60%
Support Density - 15%
Build Plate Adhesion Type - Skirt