3D Printing Army of the Old Age
Created by tartessosminiatures
A new way to mass produce your tabletop armies!
3D Printing Army of the Old Age
Created by tartessosminiatures- Pledges (5)
- Add-ons (3)
- View on Kickstarter
Pledges
24 backers
USD 33.80
Marine Infantry
Marine infantry, 6 legs, 6 torsos, 6 weapons, 3 shields, 10 heads; compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Bow Arms
Bows arms and accessories compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Infantry Legs
12 Infantry legs, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Torsos
24 torsos, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Arms+Weapons
Hammer
War Priest
Accessories
Mace
11 Maces compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Poleaxe
Helm
8 Helms compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Short Swords
Infantry Heads
18 heads compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Shields+Shield Arms
8 Different Shields+12 different arms
Dock Guard
-Dock Guard: 10 heads, 6 legs, 6 torsos, 6 different pair of arms:
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Command Arms
Command arms and accessories compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Paladin
Paladin on foot, 5torsos, 5legs, 5flails, 9helms, 5 shields, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Standard
Use heavy lance arm, or pike arm for one hand held.
Axe, One handed.
Two Handed Infantry
Tower Shields
Religious Pilgrims
Lady On Foot (bonus)
Spear Arms
6 spear arms, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Infantry Pikes
6 arms with pikes, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
All Infantry stl designs, with and without supports, including: - All related unlocked stretch goals - No shipping cost - Just a few weeks to receive them -Levy Infantry: 24 different torsos, 12 legs, 22 heads, and more than 40 arms with short swords, bows, spears, maces and more. -Dock Guard: 6 heads, 6 legs, 6 torsos, 6 different pair of arms. -Marines: 6 heads, 6 legs, 6 torsos, 6 different pikes. -Paladins: 5 heads, 5 legs, 5 torsos, 5 flails.
30 backers
USD 33.80
Long Sword
8 Long Sword Arms compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Bow Arms
Bows arms and accessories compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Light Cavalry
4 horses, 6 heads, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Horse with bard
4 different horses with 6 different heads, compatible with the Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Arms+Weapons
War Priest
Accessories
Torsos
24 torsos, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Hammer
Mace
11 Maces compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Poleaxe
Helm
8 Helms compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Cavalry Lance
8 Lance arms compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Heavy Cavalry
Heavy Horses, 4 models, 6 heads, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Great Helms, Cavalry
Great Helms (19 different models) compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Shields+Shield Arms
8 Different Shields+12 different arms
Command Arms
Command arms and accessories compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Questing Knights(Champions+accesories)
Torsos+Cape
Knight Shields
Royal Guard
Lady (For Pegasus/Horse)
swords in cavalry sheath
6 swords in cavalry sheath for knights, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Female Guard
Lady On Foot (bonus)
Spear Arms
6 spear arms, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
All Cavalry stl designs, with and without supports, including: - All related unlocked stretch goals - No shipping cost - Just a few weeks to receive them -Light cavalry: 6 different horse heads and 4 different horses, with 3 parts each, interchangeable with each other. -Bard horses: 6 different horse heads and 4 different barded horses , with 3 parts each, interchangeable with each other. -Heavy cavalry: 6 different horse heads and 4 different horses, with 3 parts each, interchangeable with each other. Middle parts are the same than in the bard horses. -24 human torsos, 8 helms, 11 fantasy knights great helms, and more than 30 arms with longswords, spears, heavy lances and more.
15 backers
USD 33.80
Long Sword
8 Long Sword Arms compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Bow Arms
Bows arms and accessories compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Accessories
Arms+Weapons
War Priest
Torsos
24 torsos, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Hammer
Mace
11 Maces compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Poleaxe
Cavalry Lance
8 Lance arms compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Griffin (Filled)
Hippogriff (Filled)(Needs main file for arm/heads)
Hippogriff+demigriffin Middle piece, no rider
Shields+Shield Arms
8 Different Shields+12 different arms
Demigriffin (filled)(needs main file)
Griffin
Two Griffin with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Flying Support
Command Arms
Command arms and accessories compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Torsos+Cape
Demigriffin
hippogriff
Spear Arms
6 spear arms, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Lady (For Pegasus/Horse)
Pegasus (Lady)
Great Helms
Great Helms from the Beast Master pack compatible with the Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
swords in cavalry sheath
6 swords in cavalry sheath for knights, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Lady On Foot (bonus)
Pegasus
2 pegasus, with 3 different wings, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
All Monster stl designs, with and without supports, including: - All related unlocked stretch goals - No shipping cost - Just a few weeks to receive them -Pegasus: 2 different heads, 2 torsos, 4 middle parts, 2 back parts, 3 wings. 3 different flying supports. -Griffin: 5 heads, 2 torsos, 2 legs, 2 tails, 2 wings. 3 different flying supports. -24 human torsos, 11 fantasy knights great helms, and more than 20 arms with longswords, heavy lances and more.
246 backers
USD 67.70
Bow Arms
Bows arms and accessories compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Hammer
Poleaxe
Short Swords
Griffin (Filled)
Hippogriff (Filled)(Needs main file for arm/heads)
Hippogriff+demigriffin Middle piece, no rider
Great Helms, Cavalry
Great Helms (19 different models) compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Dock Guard
-Dock Guard: 10 heads, 6 legs, 6 torsos, 6 different pair of arms:
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Demigriffin (filled)(needs main file)
Griffin
Two Griffin with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Flying Support
Command Arms
Command arms and accessories compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Paladin
Paladin on foot, 5torsos, 5legs, 5flails, 9helms, 5 shields, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Questing Knights(Champions+accesories)
Standard
Use heavy lance arm, or pike arm for one hand held.
Axe, One handed.
Torsos+Cape
Two Handed Infantry
Knight Shields
Royal Guard
Tower Shields
Demigriffin
hippogriff
Religious Pilgrims
Shields+Shield Arms
8 Different Shields+12 different arms
swords in cavalry sheath
6 swords in cavalry sheath for knights, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Spear Arms
6 spear arms, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Infantry Pikes
6 arms with pikes, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Pegasus
2 pegasus, with 3 different wings, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Marine Infantry
Marine infantry, 6 legs, 6 torsos, 6 weapons, 3 shields, 10 heads; compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Long Sword
8 Long Sword Arms compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Light Cavalry
4 horses, 6 heads, compatible with Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Infantry Legs
12 Infantry legs, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Infantry Heads
18 heads compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Heavy Cavalry
Heavy Horses, 4 models, 6 heads, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Lady (For Pegasus/Horse)
Mace
11 Maces compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Cavalry Lance
8 Lance arms compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Helm
8 Helms compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Horse with bard
4 different horses with 6 different heads, compatible with the Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Torsos
24 torsos, compatible with Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Pegasus (Lady)
Great Helms
Great Helms from the Beast Master pack compatible with the Human Army of the Old Age. Included with and without supports for resin printers.
The files come divided into three different folders: with supports (fixed), without supports (Fixed), and a third folder with the files without going through netfabb / onshape / ultimaker cura, and the like.
This last folder would allow you to slightly modify the files, changing them or removing some detail, such as a sword, or a fleur de lis, with programs like meshmixer. Depending on the type of slicer that you use, these can cause problems when printing, so once you finish modifying them you should use one of these tools to optimize them.
Female Guard
Lady On Foot (bonus)
War Priest
Arms+Weapons
Accessories
An entire army worthy of a king! All stl files (Does not include early pledges rewards).
17 backers
USD 50.80
Choose two of the three infantry commander, knight and beast master packs, with all related unlocked stretch goals.