There shall be Demons
Created by
-
$ 517
raised
-
12
pioneers
Campaign ended: Sat, November 26, 2022 at 02:00 PM GMT
StandArtPainting
- Pledges (5)
- Add-ons (0)
-
$517.25
raised
-
12
pioneers
Tiers
1 pioneer
USD 20.00
Chaos Snails
Bucolic and terrifying slobbery chaos snails ready to print!
This is a gallinaceous kit including :
- 2 body positions (3 if you mirror one of them)
- 3 head options
- spiky defensive shell
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Rotten Lord
Spread infections and plagues with this powerful character: A majestically rotten prince!
This Lord has two options for the right arm as well as two options for the left arm!
It's Pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Lord Gargant archlord of the thousand and one mushrooms
A filthy, demonic entity, bringing putrescence and disease where you want it
All elements are pre-supported!
The body is hollowed out to save a bit of resin
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Chaos Beast Kit
A kit for you to create your own chaotic entities. Two pieces of each body part, interchangeable to vary the possible combinations. It can also be very useful for adding and converting to other models or bases!
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Cooker
Get your aprons and your best recipes! A great cooking major demon is ready to spread the worst diseases on the battlefield!
As it is large we have thought of several options to make it easier for you to print: there is a version of the body which is full, one which is hollowed out, and one which is hollowed out and cut in two parts
The cauldron is hollowed out and there is an option for it to contain soup (yum)
Depending on the cauldron option you choose, there is a right arm option with a suitable spoon as well as a suitable tongue option.
The pre-supported version is 80% of the model size, the STL folder contains the pre-supported files, in STL format, for you to enlarge it if you wish
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The infestation of worlds will have no limit with this tier containing : - The Cooker and its options - Chaos Beast Kit to create different chaos beasts with interchangeables parts - The Rotten Lord and its 2 arms options - Chaos Snails Kit to create different chaos snails with options
0 pioneers
USD 20.00
Demonic Horror 2
This powerful horrifying magician has three head options that can suit different universes. It is adorned with multiple accessories essential to the practice of the magic arts!
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Gnarglings
You can assemble your malicious little Gnarglings with the following parts:
-3 bodies (legs, tail, belly)
-4 torsos
-4 arm sets
-3 heads
And you can make even more variations by mirroring each element :D
All parts are pre-supported
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Priest of Ruin
Priest of Ruin is a kit with the following options:
- 3 heads
- 3 body options + possibilities for the drape (2 with the drape, 2 without)
- 1 mutation option for each arm
So with this kit you can choose to compose a more or less "mutant" version of these characters :)
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Mind domination is within your reach with this Tier containing : - Priest of Ruin, Kit with mutants options - Demonic Horror with its 3 heads options - Gnarlings with interchangeables parts
2 pioneers
USD 20.00
The Vile Huntress Hero
A very dynamic heroine riding her massive mount!
Its elements can be mixed with our other kits: the slashing squad, the slashing hero, the spear infantry squad, the mounted squad.
All parts are pre-supported
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Slashing Hero
This new demonic hero ready to cut everything on his way!
This kit includes different arms options and a tail.
All elements of this hero are mixable with the slashing squad and everything is pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Soulbinder
This stupefying major demon comes in kit with the following options :
- 3 Heads options
- Arms options, with weapons/bare hand
- pieces of armor/ornements
All parts are pre-supported
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Take advantage by vice with this Tier containing : - The vile Huntress, a mounted hero - The slashing Hero !!! The options of these two models are interchangeable in order to create unique units to your liking!!! - The soulbinder with its many options
1 pioneer
USD 20.00
Lux Daemon Prince
The Lux Daemon Prince is an enticing and aggressive demon with its 4 body options: two with a stone base and two without. Each can accommodate the wings or not, at your convenience :)
We hope it will seduce you.
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Doombringer
Driven by endless anger and an unquenchable thirst for battle, the Dombringer is ready for carnage! A true centerpiece for any chaotic army or demonic collection!
Unleash this brutal force from the underworld with options :
- 2hands great ax or one-handed ax
- 2 head options
- armored or not
All parts are pre-supported
From its foot to the height of its horns it is calibrated to measure 12cm (4.72inch)
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Demolich
Here comes the Demolich, a character wielding demonic magic!
From the top of these 7 cms in height, he will impose his demonic will on the battlefield!
All parts are pre-supported
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Brute force is your better asset with this Tier containing : - The Lux Daemon Prince and its stone option - The Demolich - The Doombringer and its weapon and armor options
10 pioneers
USD 50.00
Priest of Ruin
Priest of Ruin is a kit with the following options:
- 3 heads
- 3 body options + possibilities for the drape (2 with the drape, 2 without)
- 1 mutation option for each arm
So with this kit you can choose to compose a more or less "mutant" version of these characters :)
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Demonic Horror 2
This powerful horrifying magician has three head options that can suit different universes. It is adorned with multiple accessories essential to the practice of the magic arts!
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Lux Daemon Prince
The Lux Daemon Prince is an enticing and aggressive demon with its 4 body options: two with a stone base and two without. Each can accommodate the wings or not, at your convenience :)
We hope it will seduce you.
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Rotten Lord
Spread infections and plagues with this powerful character: A majestically rotten prince!
This Lord has two options for the right arm as well as two options for the left arm!
It's Pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Cooker
Get your aprons and your best recipes! A great cooking major demon is ready to spread the worst diseases on the battlefield!
As it is large we have thought of several options to make it easier for you to print: there is a version of the body which is full, one which is hollowed out, and one which is hollowed out and cut in two parts
The cauldron is hollowed out and there is an option for it to contain soup (yum)
Depending on the cauldron option you choose, there is a right arm option with a suitable spoon as well as a suitable tongue option.
The pre-supported version is 80% of the model size, the STL folder contains the pre-supported files, in STL format, for you to enlarge it if you wish
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Vile Huntress Hero
A very dynamic heroine riding her massive mount!
Its elements can be mixed with our other kits: the slashing squad, the slashing hero, the spear infantry squad, the mounted squad.
All parts are pre-supported
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Slashing Hero
This new demonic hero ready to cut everything on his way!
This kit includes different arms options and a tail.
All elements of this hero are mixable with the slashing squad and everything is pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures. We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
The Soulbinder
This stupefying major demon comes in kit with the following options :
- 3 Heads options
- Arms options, with weapons/bare hand
- pieces of armor/ornements
All parts are pre-supported
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Doombringer
Driven by endless anger and an unquenchable thirst for battle, the Dombringer is ready for carnage! A true centerpiece for any chaotic army or demonic collection!
Unleash this brutal force from the underworld with options :
- 2hands great ax or one-handed ax
- 2 head options
- armored or not
All parts are pre-supported
From its foot to the height of its horns it is calibrated to measure 12cm (4.72inch)
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Demolich
Here comes the Demolich, a character wielding demonic magic!
From the top of these 7 cms in height, he will impose his demonic will on the battlefield!
All parts are pre-supported
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Gnarglings
You can assemble your malicious little Gnarglings with the following parts:
-3 bodies (legs, tail, belly)
-4 torsos
-4 arm sets
-3 heads
And you can make even more variations by mirroring each element :D
All parts are pre-supported
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Lord Gargant archlord of the thousand and one mushrooms
A filthy, demonic entity, bringing putrescence and disease where you want it
All elements are pre-supported!
The body is hollowed out to save a bit of resin
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Chaos Beast Kit
A kit for you to create your own chaotic entities. Two pieces of each body part, interchangeable to vary the possible combinations. It can also be very useful for adding and converting to other models or bases!
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
Chaos Snails
Bucolic and terrifying slobbery chaos snails ready to print!
This is a gallinaceous kit including :
- 2 body positions (3 if you mirror one of them)
- 3 head options
- spiky defensive shell
All elements are pre-supported!
In pictures you will find a screenshot of the settings we use to print our 3D miniatures.
We test the printability of all the plans we provide, using Chitubox on an Elegoo printer. If it works for us, it should work for you
Like our models? Allow us to produce more by joining our Patreon and get 50% discount! :) check it here
There can only be demons! Get all Tiers: - Plague - Madness - Lust - Blood at a lower price in one bundle
Please update your notification settings if you want to get notified when there is a new comment.