Raspberry Pi Soda Cam
3,960
views
79
downloads
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
0 comments
Loading comments...
Raspberry Pi Soda Cam
3D
Published 2017-08-16T14:49:29+00:00
10
0
Add to Collection
Description
I need a quick and easy way to posistion my rapberry pi camera. So, why not put it on top of an old 500ml soda bottle? I filled the soda bottle half way with water, but sand or dirt would probably be a safer fill material.
No supports are needed, I modeled in a sacrifical support for the part that slides onto the bottle cap. The holes are for M3 screws, and are too big to be tapped or threaded. It's just a friction fit onto the soda bottle.
Détail de l'impression
0.25mm layer height.
25% infill (could easily be less)
3 top layers; 3 bottom layers
2 shells.
Technical Information
Date de publication | 16/08/2017 |
Durée d’impression | - 120 minutes |
Quantité de filament | 32 grams |
Dimensions | 86.37x107.79x44.53 |
Technologie | FDM |
Complexité | Medium |
Sans support | YES |
More Information
Object Parts