AEAADV17 – Xavar’s Rise
$3.00 AEAADV17 – Xavar’s Rise
3D
Published 2024-04-29T15:39:00+00:00
Welcome to Xavar’s Rise, one of the newest creations from Head Sculptor,
Nasos Maloudis. This set was originaly going to be put in with our caves and caverns, but it is just too good to not to be a solo set! This massive 6×6 tile is done in Thicket, Cavern and Scatter versions, all included. Included as well are the floor pieces, slopes and ends to make this a complete set and cover those ends.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date de publication | 29/04/2024 |
| Price | $3.00 |
| Sans support | YES |