AEATLN14 - Atlantis Miniatures V Ocean Life
AEATLN14 - Atlantis Miniatures V Ocean Life
3D
Published 2023-10-28T02:28:50+00:00
Enter the Depths of Atlantis, and make adorable new friends or toothsome enemies. Featuring Miniatures from Carl Csurgo, Terrain from Windy Wolfe, and extra art from Will and Nasos.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date de publication | 28/10/2023 |
| Sans support | YES |