AEDOOM08 – Aescelarium
$7.00 AEDOOM08 – Aescelarium
3D
Published 2022-03-03T09:48:42+00:00
The Aescelarium has no great origin story of note. Will woke up one day and had a message notification from Nasos. During the night Nasos had sculpted this amazing BBEG encounter area. Will spent but 2 hours preparing it for publishing. A textbook operation of normality, albeit an evil incarnate that can barely be spoken. An evil place so great, we had to make up a new world for it. Aescelarium. The Stairs of Insanity. We hope you enjoy this extra dose of evil, prescribed by fate, delivered by hands that are far from idle.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date de publication | 03/03/2022 |
| Price | $7.00 |
| Sans support | YES |