AEEAST04 – Babu’s Village
$6.00 AEEAST04 – Babu’s Village
3D
Published 2022-09-12T09:22:47+00:00
This Set, Eastern Kingdoms 4 – Babu’s Village, was sculpted by Nasos Maloudis back in late 2019. Nasos sometimes takes the crazy ideas I have and explores them far beyond my wildest hopes. I mentioned needing a nice set of scatter terrain for this series and he worked up this series in just a few hours, along with an epic drunken master cat-folk miniature. Ba Bu is the protector of his village. At least he is when he can stay somewhat sober.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date de publication | 12/09/2022 |
| Price | $6.00 |
| Sans support | YES |