AEXSCT04 - Great Forests
$14.00 AEXSCT04 - Great Forests
3D
Published 2023-01-05T16:01:20+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
This set, Great Forests, was born from requests on our fans over the last few years. Károly, aka Carl, was the primary artist on this set and we had a blast working up requests on our Discord. Some of the models took quite a bit of work to get done right, but Carl was up to the task. We hope you enjoy the result, as we have already begun to integrate these files into our vast array of “Peaceful” terrain.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date de publication | 05/01/2023 |
| Price | $14.00 |
| Sans support | YES |