Animal Crossing Snowboy Christmas Ornament (Low Poly and Smooth)
Animal Crossing Snowboy Christmas Ornament (Low Poly and Smooth)
3D
Published 2020-12-18T12:51:10+00:00
Christmas ornament based on the Animal Crossing Snowfolk only these ones won't tell you off for not making them perfect and will never melt!
Low poly and smooth versions in the files.
Included with and without hanger so it can be used as a bauble or decoration.
Should print well with minimal supports.
Has a flat bottom for easy printing and so it stands up.
(I'm currently printing with no cooling as my fan broke so please excuse the poor quality of my prints - it's the printer, not the files. Yours will look nicer, I'm sure!)
Settings I used (YMMV):
Slicer: Cura 4.x
Nozzle: 185
Bed: 60
Walls: 3
Top and Bottom Layers: 4
Infill: 10% (if you want a weightier bauble just crank that up)
Speed: 60 mm/s
Cooling: 100%
Supports: Tree Everywhere
Took approximately 2.5 hrs to print
| Date de publication | 18/12/2020 |