BL Touch Mount For Micro Swiss Direct Drive with Satsana Fan Duct
BL Touch Mount For Micro Swiss Direct Drive with Satsana Fan Duct
3D
Published 2021-01-25T09:23:03+00:00
I needed a decent BL Touch Mount for the MSDD so that I could put it on the left-hand side and out of the way.
I also wanted it adjustable as most of the other mounts are fixed and make to many assumptions about the location of the nozzle to the BLTouch.
You will also need some hardware:
2 x M3*6 Hex Screws with bolts - for BL Touch
2 x M3*8 Hex Screws for Mounting to MSDD
I have also included a calibration step piece, use this by lowering your head to Zero then rest the BLtouch on the step you want.
Depending on if you have an enclosure or not, if you do use PETG otherwise use PLA.
I printed it pretty light:
0.4 Line Width
0.2 Layer Hight
4 Line count (1.6mm Wall thickness)
25% Infill
No Supports Required
Print as the parts are orientated.
| Date de publication | 25/01/2021 |
| Durée d’impression | 60 - 61 minutes |
| Sans support | YES |