Blood Altar
$5.00 Blood Altar
3D
Published 2021-07-01T16:16:31+00:00
SPAWNS OF THE GREAT ROT
Chapter: Ghuls
Subject: Blood Altar
Description
The floating blood altar that Nefarkus uses to spread his influence. This altar empowers his blood magic and enables him to summon corrupted anima wells, even make dead Phrallix's raise from their graves, a power we thought wasn't possible before, we thought they had to be alive to get corrupted, maybe he just purely controls those with blood magic, like a puppet on strings. He doesn't stop with the Phrallix, we have seen him manifest animal corpses from the ground that charges into our ranks. Only to dissolve into blood puddles right after.
Details
This model comes with an unsupported and presupported version.
Get 40% discount on this model by joining my Patreon!
3D Elements Printing guide
- Models validated and supported for 50um LH (0,05mm)
- If you cannot print them on mono printers I suggest to increase cure time (even with fast resins even to 2.6s)
- I suggest 5 burn in layers (you can also add 2 transition layers)
- Raft is thin to prevent raft separation and resin wasting + FEP degradating
- If you struggle with removing supports please use warm water to make them soft then remove it
- Cure your model after removing supports and be gentle since some of the parts are thin.
General info of codes:
Presupported = heavy presupports
L-Presupported = Lighter version of supports
LL-Presupported = they are most lightly supported, working good with well calibrated printers, also leaving minimum ammount of scars on the model.
Hollowed versions only in LYS files.
Please consider to use them instead STL, they create less suction forces that means it minimise chance for failed print!
Cheers.
Happy Printing,
- Daniel Krasuski
| Date de publication | 01/07/2021 |
| Price | $5.00 |
