Bone Moth
$2.62 Bone Moth
3D
Published 2023-08-07T19:46:14+00:00
An articulated moth made of bones! the wings are printed separately and attach to the main body.
Note the wings are fragile just like real ones and need to be clipped in after printing, this needs to be done carefully! This is an art toy and should be handled with care!
There are 3 files, one is ready to print moth and wings file, and the others are wings and the moth separately!
This model is for PERSONAL USE ONLY! commercial license available on my Patreon.
This print needs a good first layer! I recommend printing the first layer very slow to ensure good bed adhesion! Models in the pictures were printed using a brim, with a 15% infill, and 0.2 layer height. Prints without supports!
The model can be scaled, when scaling down note that the wings will be even more fragile and should be handled with care Do not recommend scaling down below 70%. I prefer printing this model at 125% as that yields strong wings and joints, this can be done by rotating model 45 degrees in the slicer and then scaling up to 125%.
| Date de publication | 07/08/2023 |
| Price | $2.62 |
| Sans support | YES |
Printed at 100% in Matte White PLA