Brain Constellation Maze
$2.49 Brain Constellation Maze
3D
Multiple Maze Variations Included!!
I’ve created several mazes using procedural algorithms, so each one is different. Additionally, they can be mirrored in the slicer so you can double the number!
Printed at 100% scale, they are intended for a 10 mm ball. They also include holes for three 6 x 1.5 mm magnets, so two halves can be joined. For this to work, remember to mirror one of the halves in the slicer!
The Brain Constellation Maze can be scaled, and the ball used should have a size accordingly to this (for instance, at 80% scale you need an 8 mm ball; at 60% it should be 6 mm, and so on).
Because the 60% scale is also a great option (you can use standard airsoft BBs, they are 6 mm), I’ve also included all the files resized with the magnet holes properly scaled.
For printing, DO NOT use supports or inner brim.
Tip: For a better looking, I recommend printing it with a translucent filament and gyroid infill.
A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion. I recommend a slow and thick first layer (8 mm/s and 0.3 mm).
Good layer cooling is also recommended, as it prevents curling and warping on overhangs.
For more tips, take a look at my printing tips.
| Status | Approved |
| Price | $2.49 |
| Sans support | YES |