Card Organizer - Anysize - more than 2500 STL files !
$2.45 Card Organizer - Anysize - more than 2500 STL files !
Published 2023-05-15T17:48:32+00:00
Table organizer for cards
If card decs are cluttering your table or if you feel the decs could be better organized, this might be the solution for you!
This object contains a customizable solution to organize decs of card while maintaining great access to the cards during game play.
This object will support any card size and any configuration and number of cards.
Currently this object contains over 2500 STL files, below is a run through of what is included. All files prints perfectly without support !
Card sizes:
This will fit both sleeved and un-sleeved cards!
- MTG_63.5x88
- MINI_USA_41x63
- EURO_MINI_45x68
- SQUARE_70x70
- WOTR_70x120
- STANDARD_USA_56x87
- EURO_59x92
- MEDIUM_57x89
- game-datacards_67x92
If a card size is missing, please let me know and I will generate files that fit the new size.
Orientation
All trays exist in both portrait and landscape mode.
Width
The trays are generated as single, double, triple etc. the current limitation is that no trays wider than 300mm are generated, however if someone with a big printer would like wider trays I can generate those.
Height
All trays are generated in the 5mm steps from 10mm to 200mm. If a wider range is needed, please let me know and I can generate those.
Dividers
The dividers exist in a variety of tolerances. The files named *_Tolerance_0.stl, is the best staring point, if you want a tighter fit print files with negative modifiers “_-2.stl” and use files with positive modifiers “_1.stl” if you want a more loose fit. As always, if you need a wider range, let me know !
Date de publication | 15/05/2023 |
Price | $2.45 |
Sans support | YES |
Did a test of a small card holder on my resin printer (Creality Halot one) printed 2 using the orientations shown in the pictures and both came out fine with no supports! The files seem totally viable for a resin printer.