Chameleon Airship SOA V2
Chameleon Airship SOA V2
Published 2023-10-18T09:37:09+00:00
Chameleon Airship from Skies of Arcadia.
Updated from old version I made back in 2017.
It’s now a lot easier to print and you can change the ship's front guns out
as well as the arm guns from the 3 different ship variants in the game.
I will put an assembly guide up later.
Printed model with these settings.
Material: PLA
Layer Height: 0.15mm
Any .STL file that the name ends with a "SN"
will needs supports turned on to print.
I have tried to reduce supports as much as possible.
The "bridge_shell.stl" will need to be
printed in "vase mode" or "Spiral vase" mode.
I used PLA crystal clear to make the bridge_shell.stl
to give it a glass look, bit you can print it with whatever.
You don’t need supports for the "Side_guns_Shield.stl"
but 1 layer of rafts may help with getting them to stick to bed because of how small they are.
Date de publication | 18/10/2023 |