Clickit Fidgets
Clickit Fidgets
3D
Published 2023-02-13T11:32:18+00:00
All Clickit Fidgets are printed in place with no supports. There are multiple different variations and sizes. EACH model comes with 3 clearance options: Tight Snap, Easy Snap, and Easiest Snap. I provided these so no matter what is going on with your clearances you should be able to print your fidget with your desired level of resistance in the snap. If you want to print the MegaClicker or other large fidgets, I recommend printing the corresponding Keychain version (Small or Large button) to figure out which clearance level works best with your printer. All easy snap clearance models have the same level of clearance, same with Tight Snap.
**This design is uploaded with a non-commercial license. Downloading these files does not grant you the right to sell commercially.
If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D
FDM or Resin: FDM
Scaling: Scaling up or down may cause some issues, but I'm sure scaling up would be safe in most cases.
Supports: No supports needed
Nozzle Size I Used: 0.4
Infill/Perimeters: I used 15% infill and they work great.
Layer Height: I used 0.20
Printing, Assembly & Post Processing
No supports, print in place. -Each fidget has 3 versions with different levels of clearance so you can achieve the perfect snap.
I would suggest starting with the Easy Snap version of whichever model you want to print. If it is too loose, go for Tight Snap. If it is too tight, go for Easiest Snap!
Your goal should be for it to be nice and tight when it comes off the printer, but still snappable. This will ensure it can still snap when it has worn a little.
| Date de publication | 13/02/2023 |
| Sans support | YES |