CR-10 Skull Legs
CR-10 Skull Legs
3D
Published 2018-02-27T18:12:51+00:00
Skull Tower Legs for the Creality CR-10 Printers. These legs will lift the printer 16.5cm allowing the control unit and other items to be stored under the printer giving you more room on the desk where your printer is situated.
I have recorded a quick video at the start of a print to show how much vibration there is. I put the needle on the print bed first, then onto the frame. I used my phone to record the video so there is some motion from that. The print was set to 60mm/s.
Credit goes to the designers of the following skulls which I used to create the legs.
https://www.thingiverse.com/thing:117939
Printed on a Creality CR-10s
Print time and weight is for all 4 legs.
| Date de publication | 27/02/2018 |
| Durée d’impression | 3810 - minutes |
| Quantité de filament | 745g |
| Dimensions | 55 x 55 x 165mm |
| Technologie | FDM |
| Complexité | Easy |
