Crown
Crown
3D
Published 2020-01-19T12:55:11+00:00
Crown Cerys an Craite - ready for 3D printing !
Part of the cosplay costume. The image of Cerys an Craite from the game The Witcher 3 Wild Hunt
The model is designed for printing on a fdm 3d printer. I recommend using support only from the table to the model, the rest of the support should be disabled - otherwise the ornament will fail.
I printed on rafts with support up to the crown. Patterns printed without support.
I modeled this crown for a friend, the diameter of the crown inside is 182.5 mm, you can change it to the required one by scaling the model. In my opinion, at first it is better to print a wide ring of the required diameter (you can measure more accurately using a centimeter or tape measure)
Overall dimensions and diameter of the crown are shown in the photo
Print model Cerys Crown - my settings
Gray PLA - I use gray part if I plan to color the model
0.4 nozzle, layer 0.2 mm
3 perimeter, 6 top and bottom solid layers
infill 30%
Support type - from build platform only
support infill 30%, Max angle 50 deg, 2 dense support layers
Speed 60 mm/s
Printing time: 10 hours
Plastic weight: 110g
| Date de publication | 19/01/2020 |
| Durée d’impression | 600 - minutes |
| Quantité de filament | 110 |
| Dimensions | XYZ 196,5 x 196,5 x 64,7 mm |