DAVINCI IQ2 SLEEVE
DAVINCI IQ2 SLEEVE
3D
Published 2023-06-07T08:58:17+00:00
A functional and decorative sleeve for a Davinci IQ2 Vaporizer. The sleeve provides some protection against drops and scratches while also helping to serve as a heat shield. The sleeve allows easy access to the bottom door and airflow dial, however opening the top door requires removing the sleeve. If you are only interested in aesthetic there is also a "Slim" version.
***UPDATED 4/5/24***
Version 2 was added to include a channel down the inner side wall to prevent getting caught on the buttons. V2 also has improved "locking in place" by including small pumps that fit into the hinges once the sleeve is on. Note that this does make it slightly trickier to slide on because it also catches on the top hinges, so I'd recommend sliding it on at an angle to start.
Can be printed without supports however for the "logo window" it's recommended. I printed on a Bambu Labs X1-Carbon with 2.8mm layer height.
Sleeve is a tight fit so it will require that your printer be dialed in.
| Date de publication | 07/06/2023 |
| Sans support | YES |