DBM RC M10 SNOWBLOWER
$35.00 DBM RC M10 SNOWBLOWER
Published 2022-01-01T12:05:38+00:00
M10 SNOWBLOWER BY DBM
The goal is to make a snowblower really effiecient, reliable and also low cost.
Every comments and suggestion is highly appreciate.
You will need to complete:
1x Motor with really low kv rating such 1000kv or less
https://www.horizonhobby.com/product/480b-bl-outrunner-motor-960kv-reverseshaft/EFL4716.html
1x Esc 30amp minimum
https://www.horizonhobby.com/product/30-amp-3s-4s-telemetry-esc-conscendoevolution/EFLA1030E.html
1x hex kit for 5mm shaft OR 32pitch 12t pinion
https://www.horizonhobby.com/product/prop-adapter-and-spinner-set-radianpro/EFL1018.html
1x servo motor 270deg (no need to modify the servo to turn 360deg but you can if you want)
https://www.amazon.ca/-/fr/ZOSKAY-num%C3%A9rique-voitures-t%C3%A9l%C3%
A9command%C3%A9es-%C3%A9chelle/dp/B07Q3Y3T7J/ref=sr_1_6?crid=3V9O7C6T00025
&keywords=20+kg+270+degree&qid=1640977821&sprefix=20kg+270%2Caps%2C86&sr=8-6
3x spring pin 3/16 dia. x 9/16 lg
https://www.fastenal.com/products/details/64137
6x bearing 5 x 11 x 4
1x bearing 17 x 26 x 5
4x bearing 12 x 18 x 4
1x assortment kit M3 screw
https://www.cafr.ebay.ca/itm/151896165844?var=451085277370
1x steel rod 5/32 dia. x 9 13/16 lg.
1x steel rod 3/16 dia. x 2 7/8 lg.
How to print:
all moving parts : 80% infill and 1.2mm to 1.6 mm wall thickness
all body parts : 20% infill and 1.2mm of wall thickness
some parts require support (name_sp)
some parts require flex material (name_flex) (you can aslo print in rigid plastic)
TRX4 MOUNT IS INCLUDED IN THE FILE
part list:
2X AUGER 1_SP
1X AUGER 2 END_SP
2X AUGER 2_SP
1X AUGER CENTER_SP
1X AUGER END_SP
1X AUGER SPACER
1X AUGER_SP
1X BEVEL 01 V2_SP
1X BEVEL 02 V2_SP
2X BLOC BEARING
1X BRACE_SP
1X BRACEG_SP
1X CHUTE_SP
1X COTE DROIT
1X COTE GAUCHE_SP
1X DEFLECTOR ROD_SP
1X DEFLECTOR
1X DRIVEN GEAR
2X FRONT DEFLECTOR_FLEX
1X GEAR CHUTE
1X GUARD AUGER 1
1X GUARD AUGER 2_SP
1X GUARD GEAR_SP
3X IDLER GEAR
1X MOTOR PLATE V2_SP
1X ROTOR V2_SP
1X SHAFT V2_SP
1X SIDE SHAFT COVER
1X SIDE SHAFT V2
1X SNOWBLOWER HITCH
1X SUPPORT CHUTE
1X SUPPORT SERVO_SP
1X TAMBOUR_SP
2X TILT
1X TOP T-CASE_SP
1X TRX4 SUPPORT D_SP
1X TRX4 SUPPORT SERVO
1X TRX4 SUPPORT_SP
UPDATE 04/02/2022 : ADD ASSEMBLY GUIDE
UPDATE 19/10/2022 : ADD CHUTE WITH A SERVO, MOTOR PLATE FOR 2216 OUTRUNNER AND MAIN SHAFT WITH 32P 12T PINION ADAPTER.
layer height .2mm
all moving parts : 80% infill and 1.2mm to 1.6 mm wall thickness
all body parts : 20% infill and 1.2mm of wall thickness
some parts require support (name_sp)
some parts require flex material (name_flex) (you can aslo print in rigid plastic)
CAN BE BUILT ON 200 X 200 BUILT PLATE
ALL BUILT WITH PLA
Date de publication | 01/01/2022 |
Price | $35.00 |
Durée d’impression | 1150 - 3000 minutes |
Technologie | FDM |