DC010 80% scale Davinci Spool Holder
DC010 80% scale Davinci Spool Holder
3D
Published 2018-08-14T18:26:11+00:00
I'm uploading this sepifically for 3DPN's contest, so I scaled it accordingly, but I designed this a while back to be the easiest to print spool holder I could think of for my Davinci, it specifically needed a small spacer underneath for stability. I've been running it daily for 2 years without issue.
It's had some popularity on thingiverse when CHEP made a Filament Friday video about it and remixed it. After seeing that 3D Printing Nerd was OK with sideways mounted filament, I checked the dimensions and at 80% it should fit his 3/4x1.5" rails like a glove. Plus, the spacer protrusion should function as a retainer to prevent it from hopping off the rail as well, with no need to brace against the back rail.
If you do want to use it on your davinci, increasing the scale to 125% should get it back to the original.
The bevel is a simple 45 degree, so you should just need to print it and your desired settings and density. I personally did it at 20% infill and 3 shells on a .4mm nozzle.
| Date de publication | 14/08/2018 |
| Technologie | FDM |
| Complexité | Easy |
| Sans support | YES |