Demonic Dice Tower
$9.90 Demonic Dice Tower
Published 2021-04-07T16:38:59+00:00
This Model was part of the Lost in the Swamp Kickstarter
There are two files: the Tower and the Top cover. (+2 new files added to repair a problem on the cover)
These files are optimized for FDM PLA printing.
These files are for non-commercial personal use only.
For further information and to support my work, visit my Patreon page:
www.patreon.com/stratationdesign3d
To see my projects and support my work too:
www.kickstarter.com/projects/stratationdesign3d
* On the 11th picture, you can see the Demonic Dice Tower painted and photographed by Newen40. (Thank you my friend for sharing the picture with me)
FDM OPTIMIZED MODEL: You will need to add your own supports in your slicer, but just inside the mouth, in the entrance.
The printing tests were carried out on a Creality Ender 3 3D printer.
Time to print (Total 2 pieces): Min 22h, Max 52h.
(Approx. 22h for a print speed of 60mm/sec, infill 10%, 0.2mm layer height, time may vary depending on 3D printer)
Dimensions (assembled):
120,13mm x 165,51mm x 183,02mm
Material quantity (Total 2 pieces): Approx. 270g PLA
Date de publication | 07/04/2021 |
Price | $9.90 |
Durée d’impression | 1320 - 3120 minutes |
Quantité de filament | 270g |
Dimensions | 120,13mm x 165,51mm x 183,02mm |
Technologie | FDM |