Dewalt 7485 Table Saw to Shop Vac 2.5hp Vacuum Hose Adapter
Dewalt 7485 Table Saw to Shop Vac 2.5hp Vacuum Hose Adapter
3D
Published 2022-01-19T09:11:56+00:00
Overview
I have a Dewalt DWE 7485 Table Saw. I also have a small ShopVac 2.5hp vacuum. Unfortunatley, I could not find a good adapter to attach the saw dust output from the table saw to the vacuum hose. There are a few out there but none I could find that fit perfect. I also did not want to purchase a bunch until I found one that fit. So I made one.
Printing the adapter
I printed this on a Creality Ender 3 V2 printer. Sliced the file in Ultimaker Cura.
There are actually 2 STL files. They are both the same adapter, just one has sharp angles and the other has smooth angles. Whichever you want is personal preference.
Disclaimer: I only printed the one with sharp angles, and it works perfect. The one with smooth angles has the same dimensions and diameter drop rate, so it should work just the same. I did not test it personally though.
Print Settings
- Filament: PETG
- Printing Temp entire time: 240° C
- Build Plate Temp entire time: 70° C
- Profile: Standard Quality - 0.2mm
- Infill: 50
Total Print Time: About 5.5 hours
| Date de publication | 19/01/2022 |