DIY Photo Box
DIY Photo Box
Published 2022-11-21T11:48:03+00:00
Do It Yourself (DIY) Photo Box. Easy to set up and take apart. Requires 4mm corrugated plastic or acrylic sheets in white (we opted for the corrugated in out test model). Useful product or promotional photographs. Can be made more permanent with clear contact cement or epoxy.
Have a suggestion on how to make this design even better? - Feel free to leave a comment. We will have a read through and see if we can incorporate your idea into the design. If we can we’ll update with a new version.
License
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for non-commercial purposes only, and only so long as attribution is given to the creator.
Recommended Setting
Printer Brand: FlashForge
Printer Model: Adventure 4
Print Software: Flash Print
Nozzle Size: 0.4mm
Material: PLA 1.75mm
Extruder Temperature: 205℃
Platform Temperature: 55℃
Layer Height: 0.08mm
First Layer Height: 0.20mm
Base Print Speed: 80mm/s
Shell Count: 2
Shell Print Order: from inner to outer
Infill Top Solid Layers: 12
Infill Bottom Solid Layers: 12
Fill Density: 15-20%
Fill Pattern: Hexagon
Supports: YES
Raft: NONE
Have suggestions on how to print this design even better? - Feel free to leave us comment. We will test on the latest version of this design and if it prints the same or better we’ll update this section.
Post Printing
Light sanding recommended.
Additional Materials
4mm Corrugated Plastic or Acrylic Sheets
Clear Contact Cement/Epoxy/Silicone
Likes & Tipping
Your likes and tips help us out so much. No obligations for either of course. Thank you so much for those that support our designs!
Date de publication | 21/11/2022 |